Smok Spirals RBA Coil

This SMOK Spirals RBA Coil Kit can deliver an incredibly tasty vape and dramatically reduce the cash that you spend on replacement SMOK Spiral coils. With such a dainty little DIY build deck, all you need is a steady hand to wick the fitted, DIY Clapton coil, then prime it with your favourite e juice. When the cotton finally loses its flavour, you just replace it with a fresh strand. Even the DIY Clapton coil is cheap and easy to replace when it gets to the end of its working life.

With so many excellent DIY coil building videos on YouTube, more vapers than ever are saving a few pounds by fitting and wicking coils in their own rebuildable atomizers (RBA’s). This SMOK Spirals RBA Coil Kit requires a little dexterity, along with some basic knowledge about coil wires, battery safety and Ohm’s law. The Spirals RBA comes pre-fitted with a DIY Clapton coil. With fatter wire and a reputation for great flavour, a Clapton coil is the perfect match for the terminal spacing on this simple, 2 screw RBA deck.

With limited space for building, the key to success with the SMOK Spirals RBA Coil Kit is ensuring that any protruding coil wire is cut close to the positive screw. A thorough check before firing will ensure that you don’t accidentally short-circuit the coil. The next most important hint is to use just the right amount of wicking cotton. The wick will swell-up after priming, so you need to make sure that the cotton isn’t too tight or too thin.

The SMOK Spirals RBA’s airflow port feeds air under the full length of the coil. This helps to generate maximum cloud and flavour. After a little practice with wicking, you’ll find that this hard-hitting little build deck will comfortably fire at 50 Watts – maybe even a little higher!

Organic cotton and e liquid is not supplied with the Spirals RBA kit. Please order separately.

Contents:
1 x SMOK Spirals RBA Coil Kit
1 x 0.55 Ohm Spaced Clapton Coil (Fitted Unwicked)
1 x Mini Philips Headed Screwdriver
1 x Spare Philips Terminal Screws
2 x Spare O Rings
 
SMOK Spirals RBA Features:
Case metal: Stainless steel
Insulation: PEEK
Style: Small, single coil rebuildable atomizer (RBA)
Deck access: Unscrew RBA barrel
Pre-fitted with a 0.55 Ohm, spaced Clapton DIY coil
Airflow: Through RBA base to central tube below coil
Airflow pattern: Covers full length of DIY coil
Terminals: 2 x Philips head screws (insulated positive screw)
Mini screwdriver included in kit
Comes with 2 spare O rings
Dual, oval e juice wicking ports
Easy building – particularly with DIY Clapton coils
Generates superb flavour
Great cloud production

Spirals RBA Compatibility:
Only compatible with the SMOK Spirals tank. Suitable for experienced vapers with knowledge of battery safety, coil wire types and Ohm’s law.

Warranty:
For warranty information see our terms & conditions page.